FUNCTION: CONTROLLING THE OPERATION OF THE SHIP AND CARE

FUNCTION: CONTROLLING THE OPERATION OF THE SHIP AND CARE

by Administrator 15. December 2009 07:25

 

                FIRST MATE OF A FOREIGN GOING SHIP (PHASE-II)

FUNCTION: CONTROLLING THE OPERATION OF THE SHIP AND CARE

                                    FOR PERSONS ON BOARD

                   PAPER: NAVAL ARCHITECTURE  PAPER-II

TIME: 3HOURS                        PASS MARKS: 100                       MAX.MARKS:200

NOTES:

1.       Question No. 1,2,3&4 are compulsory. Attempt any FOUR From the remaining

Questions.

2.       All question carry equal marks.

3.       Wherever applicable sketches should be drawn to support the answer.

 

Q 1. A light beam AG 12m in length is loaded and supported as follows:

         -At end A is a concentrated load of 101.937 t.

        -8m length of the beam from end G is loaded uniformly with load of 40.775 t/m.

        -End A is  supported by a knife edge.

        -End G is evenly supported over a length of 4m.

        Draw the SF& BM curves of the beam calculating values every 2m of length.

Q.2 M.V. Hindship in DW of RD 1.005 is at a draft of forward 7.60m, Aft 7.95m. she has to

        Load 450t of cargo, where , with respect to AP should this cargo be loaded, so as to complete

        The loading with a trim of 1.0m by stem.

Q3 a) A ship at a draft of 7.0 m, KG 6.5 m, KM 7.0m turns in a circle of radius 500m at a speed

             Of 12 knots. Calculate the heel produced.

       b) When a mass of 25 Toners is shifted 15m transversely across the deck of a ship of 8000

            tones displacement, it causes a deflection of 20 cm in a plumb line 4m long. If the

           KM=7m, calculate the KG.

Q4 Sketch mid-ship section a modern oil tanker and discuss their salient feature.

Q5 a) Define the following

Q5 a) Define the following

       (i)Deformation                  (ii)Elongation           (iii)Plasticity           (iv)Ductility

      (v)Strength                         (vi)Toughness          (vii)Fatigue              (viii)Brittle fracture

Q6 What is enclosed space as per International tonnage convention 1969 as amended?   

       Describe with the help of neat diagrams five examples of excluded spaces.

Q7 Sketch & describe.

     (i)sheer plan                      (ii)Half-Breadth plan                  (iii)Body plan

Q8 (a) On what parameters do the Rolling motion of a ship in still water depend  

       (b) Describe the Rolling motion of ship in a seaway.

Q9 What is principle of Inclining experiment. What are the precautions will you carry out

       While conducting the experiment?

                                         *************************************

 

Tags:

Previous Questions

Powered by Shipping Tutorials 1.5.0.7

Announcement / Contest

Please send your on board experiences, shippingbased articles and previous years question papers to us . Now "Fragrance " our Newletter will be published in every four month in print. For advertisement contact us at shippingtutorials@gmail.com  Smile

Announcement-2

  • Writersadda requires Articles for the monthly E-Zine “Fragrance” 

    Rules:-
    1. You need to be a member of Writersadda.com
    2. The articles will be chosen every month and will get published in the monthly E-Zine “Fragrance”.
    3. The blogs, travelogues, short stories, fiction, short novels, pages from your diary, shipping related articles , onboard experiences etc will be of minimum 700 words. And poetry blogs will have at least 3 stanzas .
    4. You can post as many entries as you can .
    5. This E-zine is getting published online and getting distributed to all the clients of Swayam Maritime  
        Academy.
    6. We will publish the compiled version in print at the end of the year, 2011.

    If you want to buy the above magazine pls contact us.